The Faithfull FAICS Coping Saw featuring a high quality powder coated steel frame and fitted with a rounded wooden handle for user comfort.
The blade can be positioned at any angle within the frame, making it ideal for cutting curves and intricate shapes in wood, fibreboard, plywood, plastics and laminates.
Depth of bow: 125mm (5 inch)
Length of blade: 165mm (6 1/2 inch)
Teeth: 14 tpi
Dovetail saw for use on wood and plastic materials.
Fine universal hardpoint toothing and light steel back for rigidity.
The flexible version has a handle which swings to allow both left and right hand sawing where access is restricted.
Length 250mm (10 in)
Left Hand Saw
Teeth 13 tpi
?Fretsaw for fine cutting work in thin materials such as wood, bone, plastics, etc - ideal for model makers
A spring-loaded pin allows the blade to be reversed to cut from left or right position. The steel back prevents bending for strong, true, straight cuts.
A wide blade enables precise cutting such as dovetails, small joints and cut-offs.
Reversible handle provides improved access in close quarters.
The soft-grip handle gives comfort and support during use.
Length 250mm (10 in)
Teeth 13 tpi
550mm mitre saw featuring a 400mm solid pressure, cast saw table with 9 pre-set mitres, clamp and adjustable length stop. TUV GS approved. Includes saw blade with hard point teeth.
This Bowsaw doubles as a hacksaw. It has a frame made from tubular steel with a simple blade change and tensioning system and a impact resistant knuckle guard. Supplied with a 300mm (12 in) bowsaw and a 300mm (12 in) hacksaw blade.
Size 300mm (12 in)
This FatMax® saw has triple edged teeth which cuts both on the push and pull stroke, the fine teeth makes it easier to start off and control for detailed work.
With induction hardpoint teeth for longer life and an improved bi-material handle to maximise user comfort.
Length 300mm (12 in)
Teeth 11 tpi
Hard-point steel blade. Powder-coated, heavy gauge, oval section steel frame. Large handle incorporates quick release blade tensioner.
* Fast Cutting Saw for Use Along & Across Grain
* Rapid Clean Cutting Action
* Rigid Blade Minimises 'Whip' & Vibration
* Suitable for All Rough Sawn Timber
* Suregrip® Soft-feel Ergonomic Grip Handle
* Finger Guide for Accuracy
* Incorporates a Useful 45/90? Angle Guide
* Size: 558.8mm (22") x 7pts
* Finish: Rough
Cuts on the pull stroke in PVC, plastics, hardwoods and softwoods. Boasts a soft-grip, quick blade-release handle and is supplied with 2 interchangeable blades. Blade length 250mm, 13tpi.
Hand saw with the following features -
Bi-material handle for user comfort, Integral 45 and 90 degrees angles built into handle, universal tooth cuts with and across the grain and hard point teeth for longer life.
Length 380mm (15 in)
Teeth 11 tpi
Professional tenon saw for fine and medium thick materials, specially adapted for cutting of small-section timber and mitre guide sawing.
Steel backed tenon saw with XT hardpoint toothing giving a very fast cutting on fine to medium and hard materials.
The teeth are bevel ground on a relatively thick blade for high precision and straight cutting.
The black coating reduces friction and gives protection against corrosion.
Blade length: 350mm (14 in).
Teeth 11 tpi.
Hardened tempered blade provides clean, controlled cutting action. New ergonomically designed cushion grip handle for comfort.
A wire framed junior hacksaw with an orange lacquered finish.
Fitted with a 32 tpi blade for metal cutting.
Blade length: 150mm (6 in)
